Trimming; Cleaning - Philips Norelco 7110X Manual De Instrucciones

ENGLISH
14 14

Trimming

To groom sideburns and moustache:
Turn razor ON.
1
C
Push down spring-release trimmer switch.
2
The trimmer can be activated while the razor is
running.
C
Hold trimmer as shown and move in
3
downward strokes with gentle pressure.
C
Close trimmer by pressing trimmer down.
4
Turn razor OFF.
5

Cleaning

C
◗ The tap symbol on the back of the razor indicates
that the razor can be rinsed under running tap
water .
◗ Regular cleaning guarantees better shaving
results.
◗ Always switch Razor OFF, unplug and remove
power cord before cleaning.
◗ Never clean, remove or replace head assembly
while motor is on.
◗ Do not apply pressure to combs. Do not touch
razor heads with hard objects as this may dent
or damage precision-made slotted combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
Cleaning: Razor Heads
The easiest and most hygienic way to clean the
razor heads is to rinse them after each use or at
least once a week with hot water: Water from
the tap should be on a hot setting, BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
◗ Regular cleaning guarantees better shaving
results.
◗ Do not immerse razor in water.
C
◗ While rinsing razor heads, water may drip out of
the base of razor.This is a normal occurence.
Always turn razor OFF, unplug from outlet
1
and remove cord from razor before
cleaning.
C
Press the Razor Head Release Button, flip
2
open the Razor Head Assembly.
C
Clean inside razor heads and hair chamber
3
by running under hot water.
C
Clean outside of Razor Head Assembly by
4
running under hot water.
Close the Razor Head Assembly and shake
5
off excess water.
ENGLISH
15