Cs1104 B-Safe & Chaperone Infant Car Seat Installation - Britax BOB SINGLE Instrucciones

INFANT CAR SEAT
INSTALLATION
CS1104 B-SAFE & CHApERONE
INFANT CAR SEAT INSTALLATION
Failure to securely attach
Infant Car Seat and properly
secure infant with seat
harness of Infant Car Seat
may result in accident,
serious injury or death.
NOTE:
This Infant Car Seat Adapter is NOT
compatible with any models of the
B-SAFE 35 Infant Car Seats.
1. Prepare Stroller
Set parking brake, rotate canopy
towards handlebar, place Restraint Belt
ends to the sides of stroller seat (see
stroller owner's manual if necessary)
2. Align Infant Car Seat
Place Infant Car Seat"rear facing",
directly centered on top of ICSA, align
ICS Adapters on Infant Car Seat with
the Click & Go Receivers on ICSA.
3. Verify Infant Car Seat is Latched
Properly
Push Infant Car Seat straight down
onto ICSA until the adapters on each
side lock into the receivers on ICSA.
CLICK
4. Verify Infant Car Seat is Securely
Attached
Lift up to ensure the Infant Car Seat
is secure.
5. Secure Restraint Belt
Proceed to section titled "Securing
Restraint Belt" (pg.14).
CLICK
13
P637100A