Easy Touch ET-47608 Manual De Instrucciones página 11

Assigning Voice Recognition to Contacts
1. Press ME and then press VOL- until "Bluetooth" menu appears. Press ME.
2. Press VOL- until "Voice cmds" appears. Press ME.
3. Select "Phone book" and press ME.
4. Press VOL+/VOL- and select the first letter of the contact to assign a voice keyword to and press ME.
5. After the beep tone, say the contact name clearly. Press ME to say the voice command again. You have
to record it twice.
6. Press and hold (
Assigning Keywords
1. Press ME and then press VOL- until "Bluetooth" menu appears. Press ME.
2. Press VOL- until "Voice cmds" appears. Press ME.
3. Press VOL- and select "Keywords". Press ME.
4. Press VOL+/VOL- and select a field to assign a voice keyword to and press ME.
5. After the beep tone, say the keyword clearly. Press ME to say the keyword again. You have to record it
twice.
6. Do steps 4 and 5 for all fields.
7. Press and hold (
Note: When recording the keywords and magic word, park your vehicle in a quiet place with the windows
closed and the heater/air conditioner off. This is necessary to obtain a higher recognition rate.
Connect Paired Devices
You can connect to an already paired Bluetooth device from your car stereo.
1. Press ME and then press VOL- until "Bluetooth" menu appears. Press ME.
2. Press VOL- until "Settings" appears and press ME.
3. Select "Paired devices" and press ME.
4. Press VOL+/VOL- and select the device you want to connect and then press ME.
5. Select "Connect" and press ME. "Connecting" will display on the screen.
6. Press and hold (
Disconnect Paired Devices
You can disconnect to an already paired Bluetooth device from your car stereo.
1. Press ME and then press VOL- until "Bluetooth" menu appears. Press ME.
2. Press VOL- until "Settings" appears and press ME.
3. Select "Paired devices" and press ME.
4. Press VOL+/VOL- and select the device you want to disconnect and then press ME.
5. Press VOL- until "Disconnect" appears and press ME. "Disconnected" will display on the screen.
6. Press and hold (
Delete Paired Devices
You can delete successfully paired Bluetooth devices from your car stereo.
1. Press ME and rotate it to the right until "Bluetooth" menu appears. Press ME.
2. Press VOL- until "Settings" appears. Press ME.
3. Select "Paired devices". Press ME.
4. Press VOL+/VOL- and select the device you want to delete. Press ME.
5. Press VOL- until "delete" appears. Press ME.
6. A delete confirmation will display. Press (
7. Press and hold (
Volume Settings
User can set the volume level for ringtone, telephone, and microphone.
1. Press ME and rotate it to the right until "Bluetooth" menu appears. Press ME.
2. Press VOL- until "Settings" appears. Press ME.
3. Press VOL- until "Volume". Press ME.
4. Press VOL+/VOL- and select between ringtone, telephone and microphone settings, then press ME.
• RINGTONE - ring tone volume.
• TELEPHONE – conversation volume.
• MICROPHONE - microphone volume.
5. Press VOL+/VOL- to adjust volume level.
6. Press and hold (
) to exit.
) to exit.
) to exit.
) to exit.
) to exit.
) to exit.
) to confirm.
E11
- 11 -