Basic Operations - Easy Touch ET-47608 Manual De Instrucciones

BASIC OPERATIONS

Turning the Unit ON/OFF (PWR)
Press PWR to turn on the unit. To turn off, press and hold this button again.
Displaying Clock
Push DISP button and clock will be shown on the display. When the unit is turn off, clock will also be shown.
Selecting a Source (MODE)
Press MODE repeatedly to switch between TUNER - CD/MP3 - USB MEMORY - MEMORY CARD mode.
Note: The mode will only be available if the device is present and inserted.
Loading a Disc
1. Press REL button to open the front panel
2. Insert a disc into the disc loading slot with label facing up
3. Close the front panel
Ejecting a Disc
1. Press REL button to open the front panel
2. Press the EJECT button to eject disc
3. Close the front panel
Adjusting the Volume
Press VOL+ or VOL- to increase or decrease volume.
SETTINGS
Clock Settings
1. Press ME and then VOL- button until Clock displays. Press ME. Hour starts blinking.
2. Press VOL+ or VOL- to adjust hour. Press ME. Minutes starts blinking.
3. Press VOL+ or VOL- to adjust minutes. Press ME.
4. Press ( ) to exit one level. Press and hold to exit settings.
Audio Settings
1. Press ME and then VOL- button repeatedly until Audio appears. Press ME.
2. Press VOL+ or VOL- and select between the following settings: Press ME to enter.
• Bass – to adjust the low tone.
• Tre�le Tre�le – to adjust the high range tone.
• �ader �ader – to adjust the sound fade front or rear.
• Bala�ce Bala�ce – to adjust the sound shift left or right.
• E�uali�er E�uali�er – Off/Pop/Rock/Classic/Flat
• Loud�ess Loud�ess – to boost the sound quality
• S�oke� Me�u S�oke� Me�u – to adjust the volume level of the system's voice
• Bee� Bee� - to activate/deactivate beep sound when pressing buttons
3. Press VOL+ or VOL- to set. Other settings just need to select Deactivate or Activate options. Press
ME to save.
4. Press ( ) to exit one level. Press and hold to exit settings.
Display Settings
1. Press ME and then VOL- button repeatedly until Dis�lay appears. Press ME.
2. Press VOL+/- and select between the following settings: Press ME to enter.
• Co�trast – to adjust the contrast of the display.
• View – select between Positive / Negative view type.
• Color – to set the display color. Choose between White / Blue / Yellow / Red / Sky Blue / Purple
/ Green / Mixed color
3. Press VOL+/- button to set. Press ME to save.
4. Press ( ) to exit one level. Press and hold to exit settings.
Language Settings
1. Press ME and then VOL- button repeatedly until La�guage appears. Press ME.
2. Press VOL+ or VOL- and select between Automatic / English / Francais / Espanol / Italiano / Deautch /
Nederlands / Portugues languages.
3. Press ME to save.
4. Press ( ) to exit one level. Press and hold to exit settings.
E5
-  -