Technical Specifications - Easy Touch ET-47608 Manual De Instrucciones

Automatic Answer
If there is an incoming call, you can set the car stereo to automatic take the calls without pressing any but-
ton.
1. Press ME and rotate it to the right until "Bluetooth" menu appears. Press ME.
2. Press VOL- until "Settings" appears. Press ME.
3. Press VOL- until "Automatic answer" appears. Press ME.
4. Select "Activate" to turn on automatic answer, "Deactivate" to turn off. Press ME.
5. Press and hold (
Sorting Contacts
You can set the order of the phone book according to First/Lastname or Last/Firstname.
1. Press ME and rotate it to the right until "Bluetooth" menu appears. Press ME.
2. Press VOL- until "Settings" appears. Press ME.
3. Press VOL- until "Advanced settings" appears. Press ME.
4. Press VOL- and select "sort order", then press ME.
5. Select "First/Lastname" or "Last/Firstname" and press ME.
6. Press and hold (
Deleting Contacts
1. Press ME and rotate it to the right until "Bluetooth" menu appears. Press ME.
2. Press VOL- until "Settings" appears. Press ME.
3. Press VOL- until "Advanced settings" appears. Press ME.
4. Press VOL- and select "delete contact", then press ME.
5. Select "One by one" or "All" and press ME.
6. Press and hold (
* IMPORTANT INFORMATION:
BECAUSE OF THE GREAT VARIETY OF PRODUCTS WITH USB,SD AND MMC CARD PORTS AND THEIR
SOMETIMES QUITE MANUFACTURER-SPECIFIC FUNCTIONS WE CAN NEITHER GUARANTEE THAT
ALL DEVICES WILL BE RECOGNIZED NOR THAT ALL OPERATING OPTIONS THAT ARE POSSIBLE IN
THEORY WILL ACTUALLY WORK
• RESET
Reset button is placed on the housing.
The reset button is to be activated for the following reason:
• Initial installation of the unit when all wiring is completed.
• All the function button do not operate.
• Error symbol on the display.

TECHNICAL SPECIFICATIONS

CD/MP3 PLAYER SECTION
Signal to Noise Ratio
Channel Separation
Frequency Response
TUNER (FM)
Frequency range
Intermediate frequency
Sensitivity
Stereo separation
Signal to noise ratio
Channel step
LINE-OUT
Output
Impedance
GENERAL
Power Supply
Speaker impedance
Output power
Note: Specification and the design are subject to possible modification without notice due to improvements.
- 1 -
) to exit.
) to exit.
) to exit.
> 60 dB
> 50 dB (1kHz)
20Hz - 20 kHz
87.5-108 MHz
10.7 MHz
2.8 µV
30 dB
50 dB
50 kHz
350 mV
10k Ohm
12V DC (10.8-15.6V allowable)
4 or 8 ohm
40W x 4CH
E12
RESET