Easy Touch ET-47608 Manual De Instrucciones página 7

Region
Region ON: AF switching or PI SEEK is implemented to the station which have all PI codes same as
current station.
Region OFF: The regional code in the format of PI code is ignored when AF switching or PI SEEK is
implemented.
Mask (Difference PI/All PI)
Select whether the search for alternative frequencies covers all broadcasting stations available (ALL
DPI) or only those of the currently turned station (DPI).
Retune (Short Time/ Long Time)
Here you can determine the time period your device will wait before it seeks a substitute radio channel,
which broadcasts traffic reports is lost. You must activate the TA operating mode before automatic
seeking can start.
Stereo / Mono
1. Press ME and then VOL- button repeatedly until Tuner appears. Press ME.
2. Press VOL+/- and select Stereo-Mono settings. Press ME.
3. Select between Stereo / Mono settings. Press ME to save.
4. Press ( ) to exit one level. Press and hold to exit settings.
Tuner Sensibility
1. Press ME and then VOL- button repeatedly until Tuner appears. Press ME.
2. Press VOL+/- repeatedly and select Tuner sensibility settings. Press ME.
3. Select between Local / Distant settings. Press ME to save.
Local – tune only to those radio stations with sufficient strong signals for good reception.
Distant – to listen to all stations including the distant ones.
4. Press ( ) to exit one level. Press and hold to exit settings.
Automatic or Manual tuning (FREQ UP OR FREQ DOWN )
When pressed momentarily, these keys are operated as SEEK tuning mode.
When pressed longer than 1 sec., they are operated as MANUAL tuning mode.
Note: The unit automatically switches back to SEEK mode after 5 seconds if no input was detected during
MANUAL tuning mode.
Storing and Recalling Stations
If you press any of the NUMBER (1-6) you can easily store up to six broadcast frequencies for
later recall with the touch of a button.
1. Choose a desired BAND (FM1-FM2-FM3).
2. When you find a frequency that you want to store in memory, press and hold a NUMBER (1-6) until the
preset number shows and lit in the display.
3. The number you have pressed will remain lit. The selected radio station frequency has been stored in
memory. The next time you press the same NUMBER (1-6), the radio station's frequency is recalled
from memory.
Note: Up to 18 FM stations can be stored in the memory.
LISTENING TO CD / MP3 / USB / MEMORY CARD
Basic operations
1. To perform fast forward or reverse, press and hold
playback at a desired point,
2. Pressing skips to the start of the next chapter. Pressing
Pressing repeatedly skips to the previous chapter.
3. To pause playback, press (
Searching for particular track (MP3 only)
There are 2 modes to use for searching mp3 tracks to play.
1. Intelligent - This mode uses character searching. User enters the first character of the filename and
unit returns the search result.
2. Explorer - This mode uses list structure display. It lists all the filenames found under a folder.
or
) button. Press it again to resume.
E7
. Release the button to resume normal
skips to the beginning of the chapter.
-  -