USER'S MANUAL
WATER PURIFIER
1. SECURITY PRECAUTIONS
WARNING
In order to ensure safety and avoid injury and property
loss to you and others, please be sure to follow the
following safety precautions. Misuse with ignoring
safety precautions may lead to accidents.
PROHIBITED:
No sunlight
No wet area
Avoid storage in places with strong sunlight, which
may cause aging of product parts. Avoid exposure
and storage in under 0
Strong magnetic devices nearby may cause fire,
product damage or circuit failure. Wet and dusty areas
may cause circuit damage.
Please do not place heavy objects on the product.
Please do not allow children operate, touch, approach
or climb the product. Children and the mentally
disabled shall use the product in cooperation with
guardians.
When cutting the power off, do not pull the power the
plug clean. Do not plug or unplug with wet hands.
No inflammables
No touch with wet hands
environment.
Please do not connect the boosting transformer to the
power plug.
Do not bring inflammable, volatile substances near
the product.
The product cannot contact or be close to heat
source and open fire.
MANDATORY:
Need
professional help
If the power cord is damaged, in order to avoid
danger, it must be replaced by professionals from
manufacturer, its maintenance department or other
similar departments. Do not squeeze, fold, knot or
damage the power cord.
It must be installed or moved by professional person-
nel. Disassembling at your own discretion may easily
damage the parts of the products and cause electric
shock. Movement at your own discretion is easy to
operate improperly and cause machine damage.
When the water does not meet the municipal water
standards (including high sediment content and
excessive residual chlorine, etc.), a pretreatment
device shall be installed before the product.
The optimum working pressure of this product is
0.1-0.4 MPa. If the water pressure is lower or higher
than this, please install pressure boosting device or
pressure reducing device accordingly.
In case of product failure, cut off the power and water
immediately and contact the local dealers.
When the ambient temperature is low, the flow will
reduce, which is the inherent feature of the filter.
Clean and replace the filter regularly.
Please be sure to use parts provided by our company.
It is normal for the product to have slight vibration and
noise when processing water.
Please install the machine as close as possible to the
floor drain.
If you do not use this product for a long time, please
cut off the power and close the three-way ball valve.
When using it again, you shall release the water for
3-5 minutes before normal use.
NOTICE
In case of water shutdown or pipeline maintenance,
02
EN
Grounding
required