Osmofilter LITEL 100 J-100 Manual De Usuario página 38

USER'S MANUAL
11. CONNECTION AND INSTALLATION GUIDE OF
MAIN SYSTEM AND WATER STORAGE JUG
1.
Take out the directional cover and plastic screw nut as
the figure, then insert joint into mounting hole on the
table, screw plastic screw nut in (no tight twisting),
finally main system line pass through the joint.
2.
Put jug base on the appropriate location of the table,
open bottom cover, get through the thread hole,
connect PE pipe with joint, put bottom cover back,
and lock bolt and press silicone pad tightly.
3.
Adjust the connected line to appropriate length, insert
decorated cover in the direction shown in the figure,
finally screw plastic nut tightly.
12. DEBUGGING THE ENTIRE MACHINE
NOTES:
The complete machine needs washing until not having
dark water and any smells when being installed for the
first time.
THE TYPE OF STORAGE WATER JUG
1.
First, open the three-way ball valve, then make the
power on.
2.
Pressing the key to open the water getting function
(the indicator light turns on, the storage water jug is
put on the base, the water purifier works, storage
water jug begins to get water.
3.
When the water jug is full, water making will be
stopped automatically. Take off the jug or press the
key in a short time to stop producing water.
12
EN