EQUIPMENT INSTALLATION RECORD
NOTICE: Read this manual carefully. If you have any
questions, please contact the technical support service
(S.A.T.) of your distributor. The data marked with (*)
must be stamped by the installer and transcribed to the
company.
DATA PRIOR TO THE INSTALLATION OF THE
EQUIPMENT:
Origin of water to be treated:
Public supply network.
Other:
Is the inlet water treated?
Hardness of the inlet water:
TDS level of the inlet water:
Inlet pressure of the equipment:
Inlet chlorine concentration:
CONTROL OF INSTALLATION STEPS:
Wash carbon prefilters.
Wash carbon postfilters.
Membrane assembly.
Hygienization according to the described protocol.
Tap chlorine concentration after rinsing.
Flow restrictor check.
High pressure switch tare.
Revision and couplings.
Watertight integrity of the pressurized system.
*TDS of the produced water (countertop tap):
Clearly inform about the use, handling and
maintenance the equipment requires to warranty its
proper functioning and the quality of the produced
water.
Given the importance of proper maintenance of the
ORDER
equipment that has to warrant the quality of the
NUMBER
produced water, the owner must be offered a
maintenance contract made by qualified technicians.
PRODUCT
CODE
EQUIPMENT
SERIAL
DISTRIBUTOR:
NUMBER
The company will be in charge only and exclusively of
the replacement of the parts in case of lack of
conformity. The repair of the equipment and the
expenses that it entails (labor, shipping cost, travel, etc).
will not be paid by the selling company, since the
manufacturer's and/or distributor's warranty are given in
its facilities.
COMMENTS:
*Result of the installation and start up:
Correct (equipment is installed and works correctly.
Adequate produced water).
F
ppm
Other:
Bar
ppm
CONFORMITY OF THE EQUIPMENT OWNER
The owner has been informed of the equipment
maintenance and about the way to contact technical
assistance service.
Comments:
ppm
17
WARRANTY
ADDRESSED
AUTHORIZED INSTALLER:
EN
TO