Making Coffee With Ground Coffee; Making Hot Water - Princess 242154 Manuel De Instrucciones

• After carrying out the prebrewing cycle, coffee will
start to come out of the spout (Fig.01, pos.13).
The coffee will stop fl owing automatically when
the preset level is reached (see par.7.3). You can
interrupt the fl ow of coffee by pressing the button
(Fig.01, pos.23 or 24).

7.2 Making coffee with ground coffee

In this operating mode, you must use the
supplied measuring spoon (Fig.01, pos.21)
to dose the ground coffee.
Only use ground coffee suitable for espresso
coffee makers in the doser (5); placing coffee
beans, instant coffee and other materials inside the
doser causes damage to the appliance.
Keep fi ngers away from the ground coffee
doser since there are moving parts.
Use the supplied measuring spoon (21) to measure the
right quantity of ground coffee to place in the doser.
Use only one fi lled measuring spoon at a time; to
make two coffees, you must go through the entire
process twice.
• Press the button (22) to select the function; the LED
lights up.
• Lift the cover of the ground coffee doser (Fig.13).
• Fill the measuring spoon with one coffee dose;
discard any excess quantity of ground coffee.
• Fill the doser with the ground coffee (Fig.14)
• Close the cover of the ground coffee doser.
• To make the coffee, press the desired coffee button
(23) or (24); the selected button starts fl ashing (see
chapter 15), while the other switches off.
• The dispensing cycle begins.
• After carrying out the prebrewing cycle, coffee will
start to come out of the spout (13).
• The coffee will stop fl owing automatically when the
preset level is reached (see par. 7.3).
You can interrupt the fl ow of coffee by pressing the
button (23) or (24).
• Then the machine automatically returns to the normal
operating mode (see para. 7.1).
7.3 Adjusting the quantity of coffee per
cup
Your coffee maker has been programmed to make 2
types of coffee: espresso coffee with the button (23)
and weak coffee with the button (24).
To adjust the programmed values to the size of your
cups, place the cup under the coffee dispenser (13),
press the button of the desired type of coffee (23) or
(24) and keep it pressed.
Wait for the machine to fi ll the cup up to the desired
level and, then, release the button.
Note: keep the button (23) or (24) pressed
during the entire coffee dispensing pro-
cess.
In this way, the appliance is programmed to supply the
quantity of coffee you selected.
8

MAKING HOT WATER

Caution: splashing may occur at the start
– scalding hazard! The hot water nozzle and
pipe can reach high temperatures: avoid touching
directly with your hands.
• Before dispensing hot water, make sure that the
green temperature-ready LEDs (23 and 24) emit a
fi xed light.
Proceed as follows when the appliance is ready to
dispense hot water:
• Place a cup and/or pitcher under the steam/hot water
nozzle (Fig.15).
• Turn the knob anticlockwise as shown in Fig.15.
• When you have obtained the desired quantity of hot
water, turn the knob clockwise to shut off the fl ow.
The appliance resets itself so that it is ready for
normal operation.
• 29 •
ENGLISH