How To Assemble Your Light Kit Assembly - Rejuvenation Petrel Manual Del Propietário

How to Assemble Your Light Kit Assembly

1. Remove the three screws in the light plate
assembly and retain the screws for Step 6. (Figure 1)
2. Remove one of the three screws in the light plate
assembly and retain the screw for Step 5. Slightly
loosen the remaining two screws. (Figure 2)
3. Remove one of the three screws in the support
bracket at the bottom of the motor assembly.
(Figure 3)
4. Assemble the light plate assembly to the support
bracket using the two key slots in the light plate
assembly. Replace the third screw and securely
tighten all three screws. (Figure 4)
Light Plate
Assembly
Motor
Assembly
15
Light Plate
Assembly
Figure 1
Figure 2
Figure 3
Motor
Assembly
Light Plate
Assembly
Figure 4