Rejuvenation Petrel Manual Del Propietário página 16

How to Assemble Your Light Kit Assembly (continued)
5. Connect the 2 single pin connectors from the LED
assembly to the 2 single pin connectors from motor
assembly. Assemble the LED assembly to the light
plate assembly using the two key slots. Replace the
third screw and securely tighten all three screws.
(Figure 5)
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
CAUTION
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
6. Assemble the light housing assembly with glass
onto the light plate assembly using previously removed
screws. (Figure 6)
Light Plate
Asssembly
16
Motor
Assembly
LED Assembly
Figure 5
Light Housing Asssembly
With Glass
Figure 6