Dyna-Glo DGP397SNP Manual De Instrucciones página 17

ASSEMBLY INSTRUCTIONS
19. Open the door assembly (M). Place LP gas
cylinder (sold separately) into the nesting
hole located on the cart bottom shelf (J).
Rotate the LP gas cylinder until the hose/
regulator coupling aligns with the threaded
valve of the cylinder. Hand tighten the hose/
regulator coupling to the threaded valve of
the LP gas cylinder.
Tighten the tank screw clockwise
the rear of the cart until the LP gas cylinder
is secured in place inside the nesting hole of
the cart bottom shelf (J).
Fully Assembled
Front View
Rear View
19
in
17
M
M
J
J
LP Gas Tank
Cylinder Screw