KTM Power Parts 60303990044 Manual Del Usuario página 6

11
11
2
8
1
7
7
Version without crash bar
- Mount collar screws M10x100 (11) (included) but do not tighten yet.
11
Version with crash bar (60312968044)
- Position the front engine guard holder (2) (included) with the bushings
10.5x22x14 (5) (included).
- Mount collar screws M10x100 (11) (included) but do not tighten yet.
5
- Position the aluminum engine guard (1) (included). Mount countersunk
screws M8x20 (8) (included) but do not tighten yet.
8
- Mount and tighten countersunk screws M6x16 (7) (included, 10 Nm).
- Tighten countersunk screws M8x20 (8) (included, 25 Nm).
- Tighten collar screw M10x30 (9) (included, 45 Nm).
- Tighten collar screw M10x40 (10) (included, 45 Nm).
- Tighten collar screws M10x100 (11) (included, 45 Nm).
Check all connections for tightness of fit after 50 km.
It is recommended to check all connections regularly for tightness of fit.