High Pressure - Craftsman 580.752352 Instrucciones De Uso

3. ALWAYS point s pray g uninasafe direction and squeeze
spray g untrigger to release retained high water
pressure.
IMPORTANT: Spray g un traps high water p ressure, even
when engine i sstopped and water i s disconnected.
The high pressure stream ofwater thatthis
equipment produces can cutthrough s kinandits
_ nderlying tissues, leading toserious i njury and
)ossible amputation.
Spray g un traps high water p ressure, even when
engine i sstopped a nd water i sdisconnected,
which cancause i njury.
o Keep high pressure hose c onnected topump a nd spray gun
while s ystem i spressurized.
o ALWAYS point spray gun insafe d irection and squeeze spray
gun trigger, torelease high pressure, every time you stop
engine. Engage trigger lock w hen n ot i nuse.
4. Engage trigger l ock onspray g unwhen notinuse.
How to Use Accessory Tray
The unit is equipped with an accessory tray with places to
store your ProjectPro
TM
nozzles, HydroFoam
TM
launcher, spray
gun and nozzle extension. There is also a hook at the front of
the accessory tray to hold your high pressure hose. Identify
all accessories with the illustration on page 6.
NOTE:The extra hole in the tray is for storing a utility brush.
The extra clip in the tray is for storing a turbo nozzle.The
brush and turbo nozzle are NOT included with your pressure
washer. You can buy these items as optional accessories.
1. Place nozzle extension through hole on accessory tray,
as shown.
Howto UseProjectPro
TM
HozzleSystem
The quick-connect on the nozzle extension allows you to
switch between three different ProjectPro
TM
system nozzles.
ProjectPro
TM
nozzlescan be changed while pressure washer
is running once spray gun trigger lock is engaged. The
ProjectPro
TM
nozzlesvary the pressure and spray pattern as
shown.
High Pressure
Delicate General Max
40° Yellow 15° Orange 0° Red
1750 PSI 2200 PSI 2500 PSI
2.3 GPM 2.2 GPIV1 2.0 GPM
Followthese instructionsto changePrejectPre
TM
nozzles:
1. Engagetrigger lock on spray gun.
WARHJHG
The high pressure stream of water that this
,_ equipment produces can cut through skin and its underlying tissues, leading to serious injury and
_ossible amputation.
o NEVER exchange ProjectPro
T M
nozzles withoutlockingthe
triggerlock on thetrigger.
o DONOT twist ProjectPro
T M
nozzles whilespraying.
2. Pull back collar on quick-connect and pull current
ProjectPro
TM
nozzle off. Store ProjectPro
TM
nozzlesin
holder provided on the accessory tray.
Select desired ProjectPro
TM
nozzle:
* For delicate rinse (lower pressure and higher flow),
for gentle cleaning of cars/trucks, boats, RV's, patio
furniture, lawn equipment, etc., select yellow
delicate ProjectPro
TM
nozzle.
,
,
3.
4.
,
Place spray gun through hole on accessory tray on right
side of unit.
Insert multi-colored ProjectPro
TM
nozzlesin spaces
provided in accessory tray.
Insert HydroFoam
TM
launcher in space provided in
accessory tray next to the multi-colored ProjectPro
TM
nozzles.
Hang high pressure hose on hook attached to accessory
tray on front of tray as shown.
13