Dyna-Glo DGG424CNP Manual Del Usario página 11

ASSEMBLY INSTRUCTIONS
9. Pre-assemble two M4x12 bolts (BB) onto the
right side shelf front assembly (L) and do not
tighten them. Make sure to leave a 5mm gap
between the bolts and the panel. Then hang
the right side shelf assembly (K) onto the bolts
and tighten the two bolts.
Attach the right side shelf assembly (K) to the
right side shelf front assembly (L) with one
M4x12 bolt (BB).
Hardware Used
BB M4x12 Bolt
10. Attach the lid handle (A) to the firebox
assembly (B) with two M6 plain washers (DD),
two M6 spring washers (EE) and two M6x25
bolts (CC).
Hardware Used
M6x25 Bolt
CC
M6 Plain Washer
DD
M6 Spring Washer
EE
9
x 3
10
A
B
x 2
x 2
x 2
11
L
K
BB
EE
DD
CC