Dyna-Glo DGG424CNP Manual Del Usario página 14

ASSEMBLY INSTRUCTIONS
15. Insert two M6x16 bolts (AA) in left side of
the firebox assembly (B) as shown, leaving
5mm of threads exposed. Align key hole in
the left side shelf assembly (I) with the two
bolts just inserted in the firebox assembly (B),
and insert four M6x16 bolts (AA) in the
remaining holes in the firebox assembly (B).
Adjust the firebox assembly (B) correctly, then
tighten all bolts.
Hardware Used
AA M6x16 Bolt
16. Place three heat tents (E) over each burner.
15
AA
AA
x 6
16
E
14
AA