Package Contents; Hardware Installation; Software Installation - Conceptronic CPSERVU Manual Del Usuario

ENGLISH
4.

Package Contents

The following items are present in the package of the Conceptronic Print Server:
•
Conceptronic Print Server
•
Power Supply 5V DC, 2,5A
•
Multi Language Quickstart Manual
•
CD-ROM with software
5.

Hardware installation

1. Make sure your printer is working normally on your computer before you
proceed.
2. Power down the printer and disconnect the printer from the computer.
3. Connect the printer with the USB cable to your Conceptronic Print Server.
4. Connect a LAN network cable to your Conceptronic Print Server and your switch
or router.
5. Power-on the Printer and connect the power supply to the Conceptronic Print
Server.
NOTE:
Your Conceptronic Print Server is equipped with a default IP address. This IP address
can be different than the IP Range in your network, or it can give a conflict with a device
in your network with the same IP Address.
To prevent this, you can use the Conceptronic Print Server Utility to change the IP
address of the Print Server. By default, the IP address of the Print Server is: 192.168.0.2
6.

Software Installation

1. Place the CD-ROM delivered with the Conceptronic Print Server in
your CD-ROM drive.
2. Open Windows Explorer, navigate to the CD-ROM and open the
folder "PS Utility".
3. Execute "Setup.exe" from the directory "PS Utility" and complete
the installation steps on your screen.
4. After installation, you can find the Configuration Utility for the Print
Server in your 'Start Menu".
14