Conceptronic CPSERVU Manual Del Usuario página 18

ENGLISH
When needed, you can change the IP address and Subnet Mask of your Print
Server. You can also set the configuration to "DHCP Assign Automatically" if
you have a DHCP server in your network.
NOTE: If you configure the Print Server for DHCP, the IP address of the Print Server can
become unknown to the user.
If you want to configure the device after this change, you can use the Utility to scan for
the Print Server.
Press "Next" to continue the configuration.
Enter the workgroup name which is used in your network in the "Workgroup"
Field and press "Next" to continue the installation. You will see a summary of the
configuration settings:
18