Conceptronic CPSERVU Manual Del Usuario página 15

ENGLISH
7. Configuring your Conceptronic Print Server
To configure your Conceptronic Print Server, you can use the installed
Configuration Utility. When you execute the Utility, you will get the following
screen:
1
At the left (1), you can see the discovered devices in your network. At the right
(2), you see the information of the selected Print Server.
You have the following selections in the Conceptronic CPSERVU Utility:
Selection
Discover Device
Setup Wizard
Change IP Address
Description
Refreshes the screen and searches for all
available Print Servers in your network.
Launches the Setup Wizard to configure the Print
Server.
Changes the IP Address of the Print Server
15
2