Avaya 3641 Manual De Manejo página 8

Answer a call on a
second line
Answer with
Silence while
Change the ring
Activate or
deactivate the
speakerphone
Adjust the speaker
EN
Adjust the headset
Place a call on
Resume a held call
microphone
End the call
Change profile
Display additional
Turn on the
If you are on a call and hear subdued ringing, a call is
coming in on a second line. The line number on the display
will be flashing. To answer this call, put your first call on
hold and press the LINE key, then the line number of the
second call.
Press any key (other than END) to answer a call when a
headset headset is plugged in.
Press the END key to silence the ring.
ringing
Press the up/down volume buttons on the side of the
volume handset during ringing.
Press the Spkr softkey and speak towards the handset.
Note that this feature may not be activated in your
communication server.
Press the volume up/down buttons on the side of the
volume handset during the call.
Press the volume up/down buttons on the side of the
volume handset during the call.
Press the More softkey and then press the Hold softkey.
hold
Press the LINE key followed by the line number key.
Press the More softkey and then press the Mute softkey.
Mute the
Press the END key. Be sure to do this at the end of each call
to return to the standby mode.
Press the Prof softkey in standby mode and use the Nav
keys to select a new profile. The selected profile is marked
with an asterisk (*).
Press the FCN key while off hook to display additional
features features that have been customized for your communication
server.
The backlight comes on when any key is pressed or when there
backlight is an incoming call and stays on for 10 seconds. It turns off
after 10 seconds if another key is not pressed within that
period.