Suntec Wellness KLIMATRONIC CoolBreeze 9.500 Tri-Vario TV+ Instrucciones De Uso página 10

Ocultar thumbs Ver también para KLIMATRONIC CoolBreeze 9.500 Tri-Vario TV+:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13
CONTROL PANEL
OPERATION
1. Please unpack the unit.
2. Plug the unit into a 220-240V – 50/60Hz outlet.
3. You can use the following functions on the control panel, as described below:
ON/OFF: To start the appliance, please press ON/OFF button.
SPEED: The appliance has three fans. Please press "FAN1", "FAN2" and/or "FAN3" and choose for every fan
the desired speed level (low/mid/high). By pressing every time "FAN1", "FAN2" and/or "FAN3", the speed will
increase to one level.
TIMER: Please press this button to set the timer (1-7h). Choose, in how many hours you want the appliance to
turn off. Press one time and add one hour.
MODE: Please press this button to choose between normal, nature or sleep mode. The indicator will light on.
Normal mode: All three fans can be controlled independently.
Nature mode: The speed of all 3 fans will change automatically in small intervals. The natural wind will be
imitated.
Sleep mode: The speed of all 3 fans will change automatically in small intervals. The device works mostly
in lower speed levels, where the noise level is reduced.
OSC: Please press this button one time. The product will oscillate left and right automatically. If you press the
button again, the oscillation will stop. Meanwhile you can adjust the up and down degree manually.
CLEANING AND STORAGE
Before you clean the fan, please turn off the appliance, wait a few seconds and pull out the plug from
the socket.
Please take at first the three screws out, which are on the back cover, then twist the front cover to the
left.
screws
Please take out the fan blades.
Clean the unit using a damp cloth, and then wipe it using a dry cloth.
Do not use chemical solvents (such as gasoline, alcohol). The surface and the entire housing could be
damaged.
Before installing the fan, please insure that all parts are dry.

Publicidad

Tabla de contenido
loading

Tabla de contenido