ZUMEX Soul 2 Serie Manual De Instrucciones página 8

You are just one step
away from starting to juice
with Soul Series 2.
SOME ADVICE
BEFORE BEGINNING
Initial cleaning
We recommend that you clean the juicing
system before first use. See the section
"Cleaning".
Attaching the cupholder
To fix the cupholder to the machine, press the
outer clips of the tray, then side the piece up
to the limit on it and release the clips.
Start up
→
Check the electrical data of your machine
with the electricity supply. Once the machine
is correctly installed, proceed to plug it into
the mains voltage.
→ After plugging in the machine, press the
button for 1" to switch on the juicer, until a
steady white light comes on. This means that
the machine is ready to juice.
→ Check that the Top lid, Waste collection
tray and the Front door are properly fitted.
A flashing white light will appear if they are
not. Remember to open the Tap (to the down
position) and use a glass at the juice outlet.
Juicing unit
Check that all the Case Out parts have been
mounted correctly.
Loading the feeder
The machine can fit 3/4 oranges in the feeder,
depending on their size.
Waste collection zone
Ensure that the Waste collection tray is
correctly fitted in its position and that the
peel deflector is in the lowest position.
EN 14