Charging Instructions - HAMPTON BAY 413-953 Manual De Instrucciones

CHARGING INSTRUCTIONS:

All solar-powered lighting requires a sufficient amount of sunlight to recharge the batteries.
Solar lighting performance is based on the amount of sunlight received during the day. Your
Solar Light can run up to 10 hours when fully charged. Place your solar light in an area which
is free from cover, shade or shadow. Note that if it is placed in a shaded area, the performance
may be dramatically reduced. In winter months or on cloudy days, the time required to fully
charge the battery(s) will increase.
BATTERY CARE INSTRUCTIONS:
Use two AA Ni-MH, 400mAh, 1.2V rechargeable battery. For best performance, replace with
Ni-MH rechargeable battery(s) annually. Refer to the following steps and the illustration
provided to replace battery.
1. Hold lamp body, rotate top cap counter-clockwise until loose. Remove top cap from lamp
body.
2. Hold top cap, rotate candle cover counter-clockwise until loose. Remove candle cover
from top cap.
3. Remove battery compartment lids from battery compartments. Remove the old batteries.
Replace with two new AA, 1.2V, Ni-MH rechargeable batteries – The recommended
replacement battery capacity should be 400~600mAh.
4. Place battery compartment lids back on battery compartments. Place candle cover back on
top cap, rotate candle clockwise until locked in place.
5. Place top cap back on lamp body, rotate top cap clockwise until lock in place.
IMPORTANT: Use Rechargeable Battery only. Battery(s) must be recycled or disposed
of properly.
3