Fig. 10; Aroma Selection; Programming Your Coffee Maker - Krups KM730 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

KR_CAFETIERE_KM730_NC00116597_Mise en page 1 06/11/12 12:00 Page9

6. AROMA SELECTION

To ensure optimum flavor, the Aroma coffee selection button (m) allows you to prepare a stronger coffee.
Follow the directions for MAKING COFFEE until step 6.
Press Aroma coffee selection button (m) to select a stronger strength of brew. The button will illuminate
and a black cup icon appears on the left top corner.

Fig. 10.

Note: This function will slow down the brewing cycle.

7. PROGRAMMING YOUR COFFEE MAKER

Auto on setting
1- Check to ensure digital clock is set to correct time. If the time is incorrect, follow the instructions in the
"Setting the Clock" section.
2- Follow steps 1 through 6 in the "Making Coffee" section.
3- Press the PROG button (n). A bell icon appears on the left bottom corner of the LCD.
4- Use the h/min button (o) to set the desired start brewing time in hours. Refer to the AM and PM
indicators on the top right side of the LCD display.
5- Press the PROG button (n) and then use the h/min button (o) to set the desired start brewing time in
minutes.
6- After 5 seconds, the coffee maker will beep and the LCD display will show the current time.
Note: You can press the AROMA button (m) if you want to prepare a stronger coffee (refers to 5- AROMA
SELECTION)
7- Press the AUTO button (l). Its led will illuminate to indicate that the coffee maker is programmed. A
clock icon appears on the right bottom corner of the LCD. The digital clock will continue to show the
current time.
8- Once the preset brew time is reached, the coffee maker will automatically initiate the brew cycle. The
On/Off button (k) will illuminate, indicating that your coffee maker has begun the brewing cycle. The
AUTO button (l) switches off.
Note: At any time during the brewing cycle, you can turn the coffee maker off or cancel a brewing cycle,
by simply pressing the On/Off button (k). No button will be illuminated, indicating that the coffee maker
is off.
To cancel a preset brewing cycle, press the AUTO button (l) - the preset brew cycle is cancelled when
the AUTO button (l) is no longer illuminated.
For your convenience, your coffee maker will remember your preset brewing time. Simply press the AUTO
button (l) to activate the preset brewing cycle. To change the preset brewing time, follow steps 3 through
7 above.
Pause & serve
This feature allows you to interrupt the brewing cycle and pour a cup of coffee before the end of the
brewing cycle.
English
9

Publicidad

Tabla de contenido
loading

Tabla de contenido