Publicidad
OPERATING & SAFETY INSTRUCTIONS
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS MAY
RESULT IN INJURIES OR DEATH.
SAFETY INSTRUCTIONS
1. Gorilla Ladders® MPX rail brackets must always be used with the MPX
multi-position ladders in the scaffold configuration.
2. Do not use the outer or inner ladder sections as a separate stepladder or
extension ladder.
3. CAUTION: A 2 inch x 10 inch construction grade lumber plank or better
must be used in all approved horizontal positions.
4. Scaffold supports must be close enough together so plank extends by at
least 6 inch on each side.
5. Plank must rest on two rungs at the same level.
6. Do not place plank on top rungs.
7. Secure plank to both scaffold
supports before each use.
STEP 1
From the stepladder position, unlock
the rail locks and completely remove
the outer sections of the ladder from
the inner ladder assembly.
To Unlock Rail Locks
Turn rail locks a 1/4 turn one at a
time to the unlocked position.
2
Publicidad
