Publicidad
LOCKING MECHANISMS
RAIL LOCK OPERATION
The rail locks located on each side of the ladder lock the inner and outer
sections and allow you to adjust the height of the ladder in one-foot
increments. (see Figures 6 & 7 below)
To Unlock Rail Locks
Turn rail locks a 1/4 turn one at a
time to the unlocked position.
Figure 6 – Unlocked
NOTE: Unlock only one rail lock at a time while supporting the inner
section. Do not adjust locks if anyone is on the ladder.
ALL LOCKING MECHANISMS MUST BE ENGAGED BEFORE USING LADDER.
DANGER
THE RAIL LOCKS ARE FULLY LOCKED WHEN NO RED IS SHOWING.
DANGER
DO NOT STAND ON LADDER WHEN ADJUSTING RAIL LOCKS.
8
To Lock Rail Locks
Turn rail locks a 1/4 turn one at a
time to the locked position.
Figure 7 – Locked
Publicidad
