Dispensing Hot Water; Drawer Format Compatibility - Bunn MY CAFE Manual De Uso Y Cuidado

DRAWER FORMAT COMPATIBILITY

Each Drawer is designed to brew with specific coffee or tea formats. Do not insert any other
format or objects in the Drawer other than those listed here.

DISPENSING HOT WATER

WITH WATER DRAWER
1. Insert Water Drawer
into Drawer Guides.
Water Drawer must be
locked into place before
brewer will operate.
2. Open Spin Lid on top of
brewer.
3. Using your preferred
cup or measuring
device, fill Pour-In Bowl
with desired amount of
water (minimum 4 oz.,
maximum 14 oz.).
Note: the cup positioned
on Drip Tray and under
the Water Drawer must be
larger than the amount of
water you pour inside.
Cup Drawer
K-Cup ® Packs
K-Cup Compatible Packs
®
Ground Coffee Drawer
Ground Coffee
Loose Tea
Pod Drawer
Soft Coffee Pods
Soft Tea Pods
Tea Bags
Water Drawer
Use to dispense hot water instantly to prepare a wide variety
of beverages, food and more.
Do not insert any coffee or tea format.
K-Cup is a registered trademarks of Keurig, Incorporated.
®
BUNN is not affiliated with Keurig, Incorporated.
8
4. Close Spin Lid on top
of brewer and position
cup on Drip Tray under
Water Drawer.
Note: be sure cup is heat
resistant.
5. Push Brew Button.
6. At end of brew cycle,
remove cup from
Drip Tray.
To remove the Water
Drawer, press down on
the button located on the
top of the Water Drawer
handle and pull Water
Drawer out along the
Drawer Guides.
K-Cup Packs
®
Ground Coffee
Soft Pods & Tea Bags
Hot Water