Publicidad
Idiomas disponibles
Idiomas disponibles
2
1
1. NCV sensing end
2. Clampjaws
3. Hand guard
4. LED indicator
5. Jaw opening trigger
1. SELECT Button
In the composite function position, press this button to switch between the corresponding
measurement funclions; in the AC/DC/Hz position, short press this button to switch between the
AC and DC functions, and long press (about 2s) this button to enter/exit the Hz measurement
function.
2. HOLD/BACKLIGHT Button
Short press this button to enter/exit the data hold mode, and long press (about 2s) this
button to turn en/off the backlight (the backlight will automatically turn off after 60s).
3. MAX/MIN Button
Short press this button to enter the maximum/minimum measurement mode and long
press this button to exit (only valid for AC/DC voltage, AC current, resistance and temperature
measurement).
4. REL Button
In the capacitance and voltage positions, press this button to store the current reading as
a reference for future readings. When the LCD display value is reset to zero, the stored reading
will be subtracted from the futura readings. Press this button again to exit the relative value
mode.
EXTERNAL STRUCTURE (Picture 1)
3
4
Picture 1
6. Function switch
7. LCD display
8. Function buttons
9. Positive (+) imput Jack
10. COM (negative -) imput Jack
BUTTON DESCRIPTION
6
7
5
8
9
10
19
Publicidad
