Publicidad
Idiomas disponibles
Idiomas disponibles
AC Current/Current Frequency Measurement (Picture 2)
1) Select the AC current ranga (4A/6A, 40A/60A or 400A/600A).
2) Press the bigger to open the clamp jaws, and fully enclose ene conductor.
3) Only ene conductor can be measured at a time, otheiwise the measurement reading will be
wrong.
Note
• The current measurement must be taken within OºC~40ºC. Do not suddenly release the
trigger, as the impact will change the reading for a short time.
• To ensure measurement accuracy, center the conductor in the jaws.
Otheiwise, ±1.0% additional error in reading will be produced.
• When the measured current is ≥400A, the meter will automatically sound an alarm and the
high voltage alarm prompt "fr." will automatically flash.
• lf the LCD displays "OL", it indicates that the current is over range and there is a danger of
damage to the meter.
20
OPERATING INSTRUCTIONS
AC current measurement
Picture 2
Current frequency
measurement
Publicidad
