EGAmaster EGATronik 51664 Manual De Instrucciones página 28

Warning
Before opening the rear cover of the meter, remove the test leads to avoid electric shock.
General Maintenance
1) When the meter is not in use, place the function switch in the OFF position to avoid
continuous consumption of battery energy.
2) Clean the meter casing with a soft cloth and mild detergent. Do not use abrasives or
solvents!
3) The maintenance and service must be implemented by qualified professionals or
designated departments.
Battery Replacement (Picture 7)
1) Turn off the meter and remove the test leads from the input terminals.
2) Unscrew the screw of the battery compartment, remove the battery cover, and replace the 2
standard AAA batteries according to the polarity indication.
3) Secure the battery cover and tighten the screw.
IMPORTANT!
The maker will not take responsibility for damage or malfunction as a result of the device
being incorrectly used or, applied for a purpose for whith it was not intended.
According to Waste Electrical and Electronic Equipment directive (WEEE), these
ones must be collected and arranged separately. If you have to throw them out, please, do not
use the usual rubbish. Please, contact your distributor for free recycling.
28
MAINTENANCE
Picture 7
NOTES