Laser 6323 Manual Del Usuario página 3

Airbag Removal Warning
• You MUST follow the vehicle manufacturer's documentation and
instructions on how to remove the airbag.
• Vehicle battery must be disconnected for at least 30 minutes (or follow
manufacturer's recommendation) before removing airbag (remember
radio code).
• Do not probe the connectors on the airbag itself.
Our products are designed to be used correctly and with care for the purpose
for which they are intended. No liability is accepted by the Tool Connection for
incorrect use of any of our products, and the Tool Connection cannot be held
responsible for any damage to personnel, property or equipment when using the
tools. Incorrect use will also invalidate the warranty.
If applicable, the applications database and any instructional information provided
has been designed to offer general guidance for a particular tool's use and while
all attention is given to the accuracy of the data no project should be attempted
without referring first to the manufacturer's technical documentation (workshop or
instruction manual) or the use of a recognised authority such as Autodata.
It is our policy to continually improve our products and thus we reserve the right to
alter specifications and components without prior notice. It is the responsibility of
the user to ensure the suitability of the tools and information prior to their use.
www.lasertools.co.uk
Guarantee
This item contains consumable elements that are NOT covered by the Tool
Connection Guarantee. For spares contact our service department direct
on: +44 (0) 1926 818186.
Airbag Test Resister Set
www.lasertools.co.uk
Part No. 6323