Operating Procedure; User Setup; Names And Functions Of The Setup Buttons; Setup Mode Procedures - Ikegami ISD-A15 Manual De Instrucciones

⑤ ­ Video output terminal (VIDEO OUT)
To be used to give out the video signal. Connect this to the video input
terminal of a monitor, switcher etc. (To be terminated with 75-ohm
impedance.)
⑥ ­ Power indicator (POWER)
The LED indicator stays on in green while the camera power is on.
⑦ ­ DC12V/AC24V power input terminal
Keep the input power at DC10.5-15.0 V or AC24V±10%.
* This installation should be made by a qualified service person and
should conform to all local codes.
⑧ - ⑨ Camera setup function switches
Please refer to the Operation Procedure chapter.

5. Operating Procedure

5-1. User Setup

This dome camera is provided with user setup function for picture quality,
and camera ID. The setup menu is a tree type on-screen-display.
When installing the camera it is possible to set up the various functions.

5-2. Names and functions of the setup buttons

SET UP
U
L R
D
* To get into Setup mode, hold E button more than 2 seconds.

5-3. Setup mode Procedures

Hold down the E button longer than 2 seconds, and the setup menu screen
at left appears on screen. A highlighted item is now selected.
Use the L/R buttons to change the selection items.
www.a1securitycameras.com email: sales@a1securitycameras.com
U
D
R
L
E
E
E-5
Available from A1 Security Cameras
To select setup parameters
(up and down)
To change setup parameters
To get in or get out to setup
m o d e , a n d t o e n t e r a n d
execute procedures.