Kolcraft Contours Options Hoja De Instrucciones página 7

To Assemble Front Wheel & Attach Wheel Cover
Spring
Loaded
Buttons
2
3
Spring
Loaded
Buttons
4
5
Place stroller back on handle bar.
1
Slide front wheel assembly onto frame.
2
NOTE: Make sure that spring loaded
buttons pop through frame. If your
spring loaded button becomes out of
place, take pliers and feed button into
hole.
CAUTION: If spring loaded buttons DO
NOT pop through, front wheel assembly
could fall off during use.
Secure front wheel assembly to the front
3
frame tubes using 12mm screws. The
screws should be aligned into the 2
holes closest to the spring loaded but-
tons. Secure with a Phillips screwdriver
on both sides.
Align bosses underneath wheel cover to
4
the two holes on the metal frame. If
bosses DO NOT line up, wheel cover on
front wheel is not on correctly. Repeat
steps 1-3. If you are still having trouble,
call customer service for assistance.
Secure wheel cover into remaining holes
5
underneath frame by basket with 16mm
screws using a Phillips screwdriver.
Repeat for second side.
7