Care And Maintenance; Faucet Adjustments; Operating Modes - Chicago Faucets HyTronic 116.121.21.1 Instrucciones De Servicio

FAUCET ADJUSTMENTS

Orientation
Operating modes and sensor ranges can be adjusted with a manual operation through the infrared sensor. A traditional lavatory
faucet is shown as an example. Faucet adjustment operations apply to all models.
Alternatively, operating modes and sensor ranges can be adjusted with a handheld PDA and Geberit Commander™ software.
For more information, visit our website at www.chicagofaucets.com/commander.

OPERATING MODES

Operating Modes
A Cleaning Mode
B Normal Mode
C Metering Mode (10 s)
D Scrub Mode (60 s)
E Scrub Mode (180 s)
F Sensor Range
Adjustment
G Reset
In order to set the operating modes, the faucet needs to be placed into "Manual Setting" mode. At this time, operating modes can
be changed within the next 30 minutes.
The following is a functional diagram to show the different settings available for manual faucet adjustment. See detailed instruc-
tions on pages 11 through 13.
FUNCTION DIAGRAM OF OPERATING MODES
Modes
A - Cleaning Mode
B - Normal Mode
C - Metering Mode 10 s
D - Scrub Mode 60 s
E - Scrub Mode 180 s
F - Sensor Range Adjustment

CARE AND MAINTENANCE

Description
The faucet is inactive for 90 seconds.
The faucet is activated if it senses a hand presence. This is the default operating mode of the faucet.
The faucet will shut off after 10 seconds regardless of hand presence detected.
The faucet will shut off 60 seconds after the detection of the last hand presence.
The faucet will shut off 180 seconds after the detection of the last hand presence.
Change the detection distance of the infrared sensor. The default sensor range is approximately 1"
beyond the spout.
All settings will be reset to original factory settings.
Water pulses in seconds [s]
5 4 1 4 1 4 1 4 1 4 1
10
Chicago Faucets HyTronic User Guide
Legend:
Water is off
Water is on