Chicago Faucets HyTronic 116.121.21.1 Instrucciones De Servicio página 12

Mount mixer handle (only for faucets with external mi-
9
xer)
Result
The "Manual Setting" Mode is now enabled.
A - Setting Cleaning Mode
Setting the cleaning mode will make the faucet inactive for
90 seconds.
Enable "Manual Setting" Mode
1
> see "Enabling Manual Setting Mode" section
Fully cover sensor with hand, until water flow stops.
2
(This takes 5 seconds)
Remove hand
3
Result
The Cleaning Mode is now active. For the next 90 seconds,
the faucet will be inactive.
Chicago Faucets HyTronic User Guide
B - Setting Normal Mode
Setting the normal mode will allow the faucet to activate only
when it senses a hand presence.
Enable "Manual Setting" Mode
1
> see "Enabling Manual Setting Mode" section
Fully cover sensor with hand. Water flow stops after 5
seconds - Continue to hold on for one (1) additional wa-
2
ter pulse
Remove hand
3
Result
Normal Mode is now activated.
C - Setting Metering Mode (10 seconds)
Setting the metering mode will allow the faucet to activate for
a full 10 seconds after it senses a hand presence.
Enable "Manual Setting" Mode
1
> see "Enabling Manual Setting Mode" section
Fully cover sensor with hand. Water flow stops after 5
seconds - Continue to hold on for another two (2) ad-
2
ditional water pulse
Remove hand
3
Result
Metering Mode is now activated for 10 seconds.
12