Chicago Faucets HyTronic 116.121.21.1 Instrucciones De Servicio página 15

Chicago Faucets HyTronic User Guide
Install shut-off screw
7
Install mixer handle (for faucets with external mixer only)
8
Result
The battery is now replaced.
Cleaning or Replacing Inlet Filter
Close supply valves
1
Disconnect braided hoses and clean or replace filter
2
(for a new filter, see "common replacement parts" )
Connect braided hoses with filter to supply valves and
fully open.
3
Cold water > white label
Warm water > no label
Result
The filter is now cleaned or replaced.
Adjusting Water Temperature (Internal Mixer)
A traditional lavatory faucet is shown as an example. These
instructions apply to all models with internal mixers.
Remove shut-off screw
1
Remove housing vertically
2
Adjust internal mixer with screwdriver
Clockwise > warm
3
Counterclockwise > cold
Mount housing vertically
4
15
+
-