Section Two Hardware Installation; Panel Layout; The Front Panel - Ansel 2615 Guía De Usuario

Complies with IEEE802.11g, IEEE802.11b, 802.11b/g MIMO, IEEE802.3, IEEE802.3u
standards
1 10/100M Auto-Negotiation WAN RJ45 port, 4 10/100M Auto-Negotiation LAN RJ45
ports
Provide advanced smart multiple input multiple output antenna technology
Supports Wireless Roaming, can move among different AP and no break
Supports 54/48/36/24/18/12/9/6/11/5.5/3/2/1Mbps wireless LAN data transfer rates
Provides 64/128 bit WEP and 802.11i encryption security
Supports wireless AP, AP Client mode
Provides WPA and WPA2 authentication and TKIP/AES encryption security
Provides wireless LAN ACL (Access Control List) filtering
Built-in NAT and DHCP server supporting static IP address distributing
Supports Virtual Server, Special Application, and DMZ host
Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC address
filtering
Supports CSMA/CA、CSMA/CD、TCP/IP、PPPoE、DHCP、ICMP、NAT
Supports UPnP, Dynamic DNS, Static Routing,
Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter
Supports firmware upgrade
Supports Remote and Web management

2.1 Panel Layout

2.1.1 The Front Panel

The front panel of the MIMO Wireless Router consists of several LED indicators, which is
designed to indicate connections. Viewed from left to right. The table describes the LEDs on the
front panel of the router.
Name Action
OFF
Power
ON
ON

Section Two Hardware Installation

No Power
Power on
The router is initializing
Description
54