Wireless Settings; Basic Configuration - Ansel 2615 Guía De Usuario

4.10 Wireless Settings

Below are the default wireless settings of the router. You must configure your wireless network
card to the same settings in order to establish a wireless connection to the router. Please refer to
your wireless network card's manual on how to configure these settings.
SSID (Network Name): MIMO
Operating Mode: AP
Channel #: 11
Encryption: Disabled

4.10.1 Basic Configuration

If you want to change the router's wireless settings, log in to the router and select the
Wireless-Basic Configuration Be sure to click OK to save the setting.
WLAN Mode: Choose from Access Point, AP Client.
SSID: You can change the router's SSID in this field. Once you have changed the SSID, your
network clients need to re-connect themselves using the new SSID.
Channel: Select the desired channel. All the network clients need to use the same channel.
SSID Broadcast: Choose to enable or disable the broadcast of your SSID
85