Ansel 2615 Guía De Usuario página 60

Type ipconfig/renew and press Enter. You should get an IP address of 192.168.1.x (where x
is a number between 2 - 254). Proceed to Section 3, Configure the Router. If you don't get an IP
address, reset the router by holding in the reset button at the back of the router for 10 seconds
while it is ON and try ipconfig/renew again.
For Windows 95/98/ME go to Start, Run, type winipcfg and click OK.
Select your network card from the drop-down menu and click Release.
60