SOUNDMASTER highline RCD1350WS Manual De Instrucciones página 12

Tabla de contenido

Publicidad

2.
During play or pause mode, if Skip down
same track no. is display and continuous the play or pause mode.
3.
After step 2, press skip down
mode.
For MP3 disc/file
1.
Place the MP3-CD to CD compartment. After focus search is performing, the total number of track will be shown on
the LCD display (16).
2.
Press Skip up
or Skip down
3.
When the desired track and album is being selected, press the " Play/Pause
Remark
-
Press " Folder up
-
The number of folder will display on LCD (16) for 1-2 seconds selected and then it will resume to the number of the
track being playback
Repeat/Random mode
Press the " Rep/Ran " button (3) during playback to select repeat and random function, a single track, single folder (MP3
only) or all the tracks can be played in difference mode as follow:-
For CD
(1) Repeat 1
(2) Repeat all track
Indicator
Play mode
on LCD display
Repeat track
REP
Repeat all
REP
Random
RANDOM
Off mode
--------------
For MP3 disc/file
(1) Repeat 1
Play mode
Repeat single track
Repeat single folder
Repeat all tracks
Random
Off mode
Repeat play
You can listen the desired tracks or folder repeatedly by this function.
Random play
You can listen all the tracks in a random order by this function
CD / MP3 disc programming
Up to 20 tacks can be programmed for disc play in any order. Before use, be sure to press the stop button.
1.
Set in CD mode.
2.
Press the Memory button (2), " MEMORY " & " P01 " will appear and flashing on LCD display (16).
3.
Select a desired track by using the Skip up
4.
Press the Memory button (2) to enter the track into the memory.
5.
Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6.
When all the desired tracks have been programmed, press " Play/Pause
order you have programmed.
"
7.
Press " Stop
button (14) to terminate program play.
"
Press " Stop
button (13) at CD stop mode to cancel all programmed memory until the " MEMORY " indicator
disappear on LCD display (16).
For MP3 disc / file, press the " Folder up " button (10) to select the 1
up the song selection.
The programming mode will automatically stop if no button is being pressed in a period of about 30 seconds after
pressing the Memory button (2).
button (11) again, it will go to the previous track and continuous the play or pause
(11) button to select the track number.
or down
" button (9/10) on main unit can select the MP3 folder directly.
(3) Random
(2) Repeat 1 folder
Indicator
on LCD display
REP
REP &
REP
RAN
-----------------
button (11) is pressed, it will go back to the beginning of the track,
(3) Repeat all tracks
flashing
/Skip down
buttons (11).
st
track of next folder directly and hence to speed
3
" button (13) to start playback.
(4) Off mode
(4) Random
" button (13) to play the disc in the
(5) Off mode

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Highline rcd1350beHighline rcd1350ro

Tabla de contenido