Choose a good, cleared assembly area and get a
friend to help you put your smoker together. Lay
card board down to protect smoker finish and
assembly area. Turn the smoking chamber upside
down to begin assembly.
Step 1
Attach legs to the bottom of the smoking
chamber using six M6 x 12 mm bolts.
Step 2
Attach wheel bracket using three M6 x 45 mm
bolts. Next insert wheel axle through hole in the
wheel bracket. Place wheels on the ends of the
wheel axle, and secure with two lock nuts.
Step 3
Attach smoker handle using four M6 x 30 mm
bolts and four M6 nuts.
5