( 1L6 ) Luxur y-Lift
6-Motor Massage & Heat Assembly Instructions:
(Assembly Instructions Continued)
WARNING
- To reduce the risk of serious injur y:
•
Check the condition of the power transformers, electrical cords, plugs
and connectors monthly. Keep the power transformer and electrical
cords away from heat sources. Never operate the unit with a damaged
power transformer, electrical cord, plug or connector. Contact your
La-Z-Boy
®
dealer for ser vice.
7. Locate and connect the Power Transformer.
•
Locate the Power Transformer secured to the rear rail. Carefully cut the
cable tie and remove the Power Transformer from the rear rail. Remove
the packing and unwind the cord.
•
Locate the Motor Extension Wire attached to the rear of the unit (F
Remove tie and unwind cord.
•
Align the white dot on the Power Transformer connector with the arrow
on the Motor Extension connector (F
together until they are secured with no gap between them.
8. Attach the outside back upholster y cover.
•
Pull the outside back upholster y cover down tight. Firmly press the
fastening tape on the outside back upholster y cover to the fastening
tape on the bottom of the rear rail.
WARNING
- To reduce the risk of serious injur y:
•
Provide a clear path for operation of the chair, back and legrest.
Place tables and area rugs at a distance to allow the legrest to fully
extend without rubbing or interference.
9. Choose a location for the chair that is close to an electrical outlet and
proceed to the Batter y Backup Assembly Instructions and the Operating
Instructions.
NOTICE:
To prevent damage to the connectors and cords, it is important
to unfasten all connections prior to removing the back.
10. To remove the back, unplug the Power Transformer and reverse the
Assembly Instructions steps.
12
®
Power Recliner with
7). Push the connectors
IGURE
( 1L6 ) Luxur y-Lift
6-Motor Massage & Heat Assembly Details:
6).
IGURE
®
Power Recliner with
F
6
IGURE
Rear Rail
Motor Extension Wire
F
7
IGURE
Motor
Extension
Connector
Transformer
Connector
13