Turnstone Bivi Manual Del Usario página 14

Install Hoodie on Bivi Lounge
(without exposed attachment)
10.
Refer to the drawing above and
measure to find the approximate
location of the pre-drilled holes under
the fabric.
Locate Holes
11.
Use your fingertip to locate holes
under fabric and padding.
Confirm and Indicate Holes
12.
Use a pin to confirm hole locations.
Use the sides of the hole as a guide to
cut a small slit in the fabric and padding.
Keep the slit smaller than the base of
the connector.
NOTE:
Return to step 4 of Hoodie
assembly instructions to finish the
assembly.
11
10
19.75
4.25
1.20
12
Page 14 of 17
939500562 Rev H