Installation; Step 1: Choosing The Type Of Installation You Need - Bodet Style 5 Instrucciones De Instalación

II

- Installation

The visuals below refer to double sided support brackets for flag-mounted Style 10 clocks.
However, the assembly principle is identical for the entire Style II range. Several specific features
will be added for each model (e.g.: earth wiring for Style 10 and 10S).
Some reference numbers (screws, nuts, etc.) given in this document relate to the double sided
support bracket for Style 10/10S (ref.: 946005): match the hardware reference numbers with the
parts list for the bracket you are installing.
Please refer to the technical features on page 16 for the relevant dimensions.

Step 1: Choosing the type of installation you need

2 types of installation are possible:
flag-mounted or ceiling-mounted.
Flag-mounted installation
(left-hand mounting)
1) Use cutting pliers to cut out the blanking plate on the bracket at the desired place (cut through
the areas circled in red below).
Suspended installation:
Cut out the blanking plate on the longest flange
of the support bracket.
6
Flag-mounted installation
(right-hand mounting)
Flag-mounted installation:
Cut out the blanking plate on the shortest
flange of the support bracket.
EN
Ceiling
installation