Using The Product As Intended; Safety Notes; Important Notes; Functions - marklin DHG 700 Serie Manual De Instrucciones

1. Using the Product as Intended

This locomotive is to be used only with an operating system
designed for it (Märklin AC, Märklin Delta, Märklin Digital or
Märklin Systems).

2. Safety Notes

Make sure you read the following safety notes before using this
Märklin product for the first time.
• Use only switched mode power supply units and transformers
that are designed for your local power system.
• This locomotive must never be supplied with power from more
than one transformer.
• Pay close attention to the safety notes in the
instructions for your operating system.
• The feeder track must be equipped to prevent interference with
radio and television reception, when the locomotive is to be run
in conventional operation. The 74046 interference suppression
set is to be used for this purpose.
• WARNING! Not suitable for children under 3 years. Sharp
edges and points required for operation. Danger of choking due
to detachable small parts that may be swallowed.
• The LEDs in this item correspond to Laser Class 1 according
to Standard EN 60825-1.
• Do not expose the model to direct sunlight, extreme changes
in temperature, or high humidity.

3. Important Notes

• The operating instructions and the packaging are a compo-
nent part of the product and must therefore be kept as well as
transferred along with the product to others.
• Maintenance, servicing, and repairs may only be done by
adults.
• Please see your authorized Märklin dealer for repairs or spare
parts.
• The warranty card included with this product specifies the
warranty conditions.

4. Functions

• Recognition of the mode of operation: automatic.
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: 025 MHI
• The locomotive in this set is set for address 72 for operation
with other controllers.
• Addresses that can be set:
1-80 (Control Unit 6021/Mobile Station 60651/652)
1-255 (Central Station 6021x/Mobile Station 60653)
• Adjustable Acceleration delay (ABV).
• Adjustable Braking delay (ABV).
• Adjustable maximum speed.
• Various controllable functions.
• Volume can be changed for the sound effects.
• Setting the locomotive parameters (address, acceleration/
braking delay, maximum speed):
with the Control Unit, Mobile Station, Central Station.
• Headlights, changing over with the direction of travel.
• Only the train control functions and headlight changeover
feature are available in analog operation.
7