Home Decorators Collection ZOLMAN PIKE ETL 60-KBR Guía De Uso Y Mantenimiento página 12

Assembly - Attaching the Accessories
2
Attaching the light kit fitter assembly
□
Remove one screw (LL) from the light kit pan, and loosen, but
do not remove the other two screws.
□
Connect the wires from the light kit fitter assembly (H) to
the wires from the fan motor assembly (G) by connecting the
molded adaptor plugs together. Carefully tuck all wires and
splices into the switch cup.
□
Push the light kit fitter assembly (H) up to the light kit pan so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit fitter assembly (H) clockwise to secure.
□
Re-install the screw that was removed in the first step.
□
Make sure all the screws are firmly tightened.
3
Installing the shade
WARNING: Do not overtighten when installing the shade into the
light kit. Allow the shade to cool completely before removing.
□
Place the glass bowl (I) into the light kit (H), aligning the three
flat areas on the top of the flange of the glass bowl (I) with
the three raised dimples in the light kit (H). Turn the shade
clockwise until it stops.
12
H
LL
H
I
G