Attaching The Fan Blades - Home Decorators Collection ZOLMAN PIKE ETL 60-KBR Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
6

Attaching the fan blades

□
Attach a blade (F) to the fan-motor assembly (E) by inserting
the blade (F) into the slots in the side of the fan motor
housing and aligning the three screw holes in the blade (F)
with the holes in the center flywheel and secure with screws
(AA).
□
Make sure all the screws are firmly tightened.
□
Repeat these steps for the remaining blades.
Assembly - Attaching the Accessories
1
Installing the light kit pan
□
Remove one screw (JJ) from the black bracket below the fan
motor assembly (E), and loosen but do not remove the other
two screws.
□
Push the light kit pan (G) up to the fan motor assembly (E) so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit pan (G) clockwise.
□
Re-install the screw (JJ) that was removed in the first step.
□
Make sure all the screws are firmly tightened.
F
11
Please contact 1-800-986-3460 for further assistance.
E
AA
E
G
JJ
HOMEDEPOT.COM/HOMEDECORATORS