Safety Features - Phocos CMLNL Manual De Instrucciones

With these jumpers, the following settings can be configured:
Jumper
Function
Setting
jumper open
Setting jumper
closed
Factory
setting
After completing the setting, replace the cover and tighten it with
the screws.

Safety Features

The controller is protected against improper installation or use:
Battery
connected with
correct polarity
Reverse polarity
GEL (1)
Battery type
Liquid
electrolyte
GEL (VRLA
battery)
Jumper open
(liquid
electrolyte)
At the solar At the battery
terminal
Unrestricted Normal operation
Yes, not at
24V system
voltage
Acoustic Warning
30
Function of low
voltage disconnect
State of charge
controlled
Voltage controlled
Jumper open
state-ofcharge
controlled
terminal
Yes, if only the
battery is
connected.
LVD (2)
At the load
terminal
Unrestricted
Load output is
protected, but
loads might be
damaged.