Programming Lock-out
By pushing the button for 8 sec in normal operation mode the
programming lock-out is activated to prevent any accidental settings
change. Another 8 sec push releases the lock-out.
General Safety and Usage Recommendations
Intended Use
The charge controller is intended exclusively for use in photovoltaic
systems with 12 V or 24 V nominal voltage and in conjunction with
vented or sealed (VRLA) lead acid batteries only.
Safety Recommendations
Batteries store a large amount of energy. Never short circuit a
battery under all circumstances. We recommend connecting a fuse
(slow acting type, according to the nominal controller current)
directly to the battery terminal.
Batteries can produce flammable gases. Avoid making sparks, using
fire or any naked flame. Make sure that the battery room is
ventilated.
Avoid touching or short circuiting wires or terminals. Be aware
that the voltages on specific terminals or wires can be up to double
the battery voltage. Use isolated tools, stand on dry ground and
keep your hands dry.
Keep children away from batteries and the charge controller.
Please observe the safety recommendations of the battery
manufacturer. If in doubt, consult your dealer or installer.
34